SteriPEN Ultra Manual

Safe drinking water
Anywhere. Anytime.
Hydro-Photon, Inc.
PO Box 675
262 Ellsworth Road
Blue Hill, ME 04614 USA
Toll Free USA: 1-888-SteriPEN
(+1) 207-374-5800
info@steripen.com
www.steripen.com
ULTR.UG.140430 © 2014 Hydro–Photon, Inc.

Meet Ultra, the purifier

that smiles back!
Thanks for choosing the
SteriPEN Ultra and
congratulations on your
purchase of the world's
most advanced portable
UV water purifier!
Ultra is built to be simple,
straightforward and safe. If
after reading this guide you
have any questions, please
don't hesitate to call us at
1-888-826-6234. We love
hearing from you!
Also, be sure to visit us
online and register your
Ultra for all the latest news
and special deals.
Thanks again and happy
trails from your friends at
SteriPEN!
www.steripen.com
facebook.com/steripen
P.S. Don't forget to recycle
@steripen
the packaging!

Easy to Use

Before using
Charge battery.
From a wall outlet or
computer's USB port.
Step 1
Push button.
1x for 1 liter,
2x for 0.5 liter.
Step 2
Place lamp in water.
Submerge metal sensor pins.
Step 3
Stir until you see the smile.
Dry bottle mouth before
enjoying.
Ultra's Anatomy
USB end cap
(do not remove)
OLED screen
USB dust cover
Activation button (Micro USB port)
Volume selection
– 1L
instructions
– 0.5L
Rubberized

Specifications

neck
Treatment size: 0.5 or 1 liter
Treatment time: 48 or 90 seconds
Lamp life: 8,000 treatments
Water
Treatments per charge: up to 50
sensing
Minimum bottle opening: 20mm
pins
Weight: 140.7g
UV bulb
186 x 42x 33mm
Protective cover
OLED Display Key
Treatment
success/failure
Note: Internal
Li-ion battery is
Treatment status
recharged via
micro USB
Treatment volume
port and
Battery status
included cord

Getting to know Ultra

Ultra wasn't in the water long
enough to make it safe. Make sure
the water sensors stay fully
submerged throughout the whole
treatment.
It's cold out and Ultra needs to
warm up. A treatment will take a
little extra time while the bulb
reaches the right temperature. This
feature adds a few seconds to
ensure safe treatment.
Ultra didn't have enough power in
its battery to safely treat the water.
Charge and try again.
Ultra couldn't treat the water
because either the lamp is
completely used up or it has been
damaged.

Ultra Charging Options

Ultra's USB-rechargeability offers a variety of
recharging choices. Power up from an electrical outlet,
a computer's USB port or a portable solar panel.
From an outlet (2-3 hours)
Attach the USB cord to a wall adapter's USB port and
plug both into a wall outlet. Plug the cord's micro USB
end into Ultra's micro USB port and place it on a
secure surface.
From a computer (3-5 hours)
Plug the USB end of the included cord into a
computer's USB port and connect Ultra via the micro
USB end of the cord. Make sure that the computer is
connected to a power source and doesn't go to sleep
during charging.
From a solar charger (depends on charger)
Connect Ultra to a solar charger via the USB cord and
position the solar charger so that it is directly exposed
to the sun. Reposition the solar charger during the day
for best performance.
The water is safe to drink!
Ultra's bulb has around 75%
of its life left (approximately
6,000 treatments) and its
battery is roughly 75% full.
The treatment was
successful but Ultra's UV
bulb is near the end of its life
and has fewer than 100
treatments left.
If Ultra's battery is charged, you are carefully following the
operating instructions and Ultra still isn't working, it might
need professional repair work. Either bring Ultra to your
local dealer or get in touch with us at 1-888-826-6234. Do
not try to fix Ultra yourself.