Connecting A Power Source - Samsung HMX-U10 User Manual

preparation

CONNECTING A POWER SOURCE

• Be sure to charge the battery before you start using your camcorder.
• This camcorder features a built-in battery that can be charged by connecting the AC power adaptor. There is no
need to replace batteries.
• The battery may be charged a little at the time of purchase.
Charging the battery
You can charge the battery using the AC power adaptor or
USB cable.
1. Press the Power (
2. Open the jack cover of the camcorder.
3. Charge the battery using the AC power adaptor or USB
cable.
• The CHG (charge) lamp lights up and charging starts.
When the battery is fully charged, the charging (CHG)
lamp turns green.  page 15
Using the AC
power adaptor
Using the USB
cable
14_English
) button to turn off the camcorder.
Connect the AC power adaptor to
the camcorder properly and plug
the AC Power adaptor in the wall
outlet.
Connect the USB cable to the
camcorder properly and connect
the other end to a USB port of a
PC.
Using the AC power adaptor
Using the USB cable
Yes
No
Yes
No