Symptoms And Solutions - Samsung HMX-U10 User Manual

✪ If you encounter any problems using your camcorder, check the following before asking for service repair.
If these instructions do not solve your problem, contact the nearest Samsung authorized service center.

Symptoms and solutions

Power
Symptom
The camcorder does not turn on.
The power automatically turns off.
Power cannot be turned off .
The battery is quickly discharged.
Displays
Symptom
The recorded image is more narrow or fat
than original image.
Unknown indicator appears on the screen.
The after image remains on the LCD
screen.
The image on the LCD screen looks dark.
• Charge the battery.
If you use an AC power adaptor, make sure it is properly connected to the wall outlet.
•
Unplug the AC power adaptor, and reconnect the power supply to the camcorder
•
before turning it on.
• Is "Auto Power Off" set to "5 Min"? If no button is pressed for about 5 minutes,
the camcorder is automatically turned off. To disable this option, change the setting
of "Auto Power Off" to "Off." ➥page 59
The battery is almost discharged. Charge the battery.
•
• Use the AC power adaptor.
• Unplug the AC power adaptor, and reconnect the power supply to the camcorder
before turning it on.
The temperature is too low.
•
The battery is not fully charged. Recharge the battery.
•
• The battery reached the end of its lifespan and cannot be recharged.
Contact your nearest Samsung authorized service center.
• You should check the resolution before you record. ➥pages 43-44
A warning indicator or message appears on the screen. ➥pages 79-80
•
• This occurs if you disconnect the AC power adaptor before turning the power off.
Ambient light is too bright. Adjust the brightness and angle of the LCD.
•
Explanation/Solution
Explanation/Solution
English_81