Sunbeam Sleep Perfect BL51 User Manual page 9

Fitting your electric blanket (continued)
Connecting the controls
To connect the controls, lift one corner of
the blanket near the head of the bed to
expose the connector socket (see Figure 3).
With the control set to the off position, pass
the control cord through the triangular hole in
the fitted skirt and insert the connector plug
into the socket. Ensure it is firmly clicked
into position. Repeat on the other side if
required. Plug the controls into a 230-240V
power outlet and turn the power on.
Note: Ensure that the controls are connected
to the blanket before inserting the power cord
into the power outlet. Connecting the power
before attaching the controls to the blanket
will replicate a power interruption and
activate the safety system, preventing your
blanket from heating.
Caution: The cord and controls must be kept
outside the bed and away from external
heating sources such as heaters and lamps.
Do not cover the control.
Figure 3.
7