Sunbeam Sleep Perfect BL51 User Manual page 11

Using your 9 heat control with timer continued
75 minute setting
Use the 75 minute setting to preheat your
bed before hopping in. Move the slide switch
to the 75min position. The temperature dial
will then illuminate enabling you to turn the
dial to your desired heat setting. The timer
indicator light (positioned next to the slide
switch) will go out, indicating that the blanket
is on and heating.
Your electric blanket will automatically switch
off after 75 minutes. The timer indicator
light will illuminate and the light in the
temperature dial will go out, indicating that
the timer period has elapsed and the blanket
is no longer heating.
To restart the timer, move the slide switch
to the OFF position and then return it to the
desired timer position.
12 hour setting
Ideal for colder nights or those who like warmth
all through the night, the 12 hour setting
automatically switches your electric blanket off
after 12 hours. Move the slide switch to the
12 hour position. The temperature dial will
then illuminate enabling you to turn the dial
to your desired heat setting. The timer indicator
light (positioned next to the side switch) will
go out, indicating that the blanket is on and
heating. Sunbeam recommends that you use
only settings 1, 2 or 3 for all night use.
Your electric blanket will automatically switch
off after 12 hours. At the end of the timer
period, the timer indicator light will illuminate
and the light in the temperature dial will
go out, indicating that the timer period has
elapsed and the blanket is no longer heating.
To restart the timer, move the slide switch
to the OFF position and then return it to the
desired timer position.
9