Demo; Anynet+ (Hdmi-Cec) - Samsung HMX-M20N User Manual

system setting

Demo

Demo mode automatically shows you the major functions of your camcorder so that you can use them more
easily.
1. Touch the Menu (
• If you don't want this function, touch "Off."
To exit the menu, touch the Exit ( ) or Return (
2.
• The Demo function starts on the LCD screen.
Submenu items
• Off : Disable the function.
• On: Enable
Using the Demo function
• The Demo mode is Canceled in the following cases:
- If the LCD screen is touched.
- If you press any button (Recording start/stop, Q.MENU, display (
MODE, PHOTO, etc.). However, the camcorder enters the Demo mode automatically after
5 minutes in STBY mode if it is idle for 5 minutes without an operation. If you don't want the
Demo function to start in that fashion, set "Demo" to "Off."
• The Demo function does not operate in the following case:
- If "Auto Power Off" is set to "5 Min" and you are using the battery as the power source, the
Auto Power Off function operates before Demo can start.

Anynet+ (HDMI-CEC)

This camcorder supports Anynet+. Anynet+ is an AV network system that lets you control all connected
Samsung AV devices with an Anynet+ supported Samsung TV remote control.
1. Touch the Menu (
2. Touch a desired submenu item.
3. To exit the menu, touch the Exit ( ) or Return (
• When the camcorder is connected to the Anynet+ supported
TV, you can operate some functions of the camcorder using
the TV's remote control.
Submenu items
• Off: Disable the fun
• On: The Anynet+ functio
• When you turn on the camcorder and it is connected to an Anynet+ supporting TV with an HDMI
cable, the Anynet+ supported TV automatically turns on. If you do not want to use this Anynet+
function, set "Anynet+ (HDMI-CEC)" to "Off."
• For details about Anynet+ (HDMI-CEC), refer to the user manual of the Samsung Anynet+
104
supported TV.
) Setting ( ) tab
s the Demo function.
) Setting ( ) tab
ction.
n is enabled.
"Demo" "On."
) tab.
"Anynet+ (HDMI-CEC)."
) tab.
Language
Demo
Anynet+ (HDMI-CEC)
7 / 7
)/ CHECK, SMART AUTO,
Language
Demo
Anynet+ (HDMI-CEC)
7 / 7
85
MIN
85
MIN