Demo
Demo mode automatically shows you the major functions that are
included with your camcorder so that you may use them more
easily.
1.
Touch the Menu (
( ) tab "Demo."
2.
Touch the desired submenu item.
3.
To exit the menu, touch the Exit
(
) or Return (
) tab.
Submenu items
•
Off: Disable the Demo function.
•
On: Enables the Demo function.
Using the Demo function
You can easily operate demo function touching Menu (
seconds.
The Demo mode is canceled in the following cases:
- If the LCD screen is touched.
- If you press any button (Recording start/stop, Anti-shake
(OIS), Display (
However, the camcorder enters the Demo mode automatically
after 5 minutes in STBY mode if it is idle for 5 minutes without an
operation. If you don't want the Demo function to start, set "Demo"
to "Off."
The Demo function does not operate in the following case:
- If you set "Auto Power Off" to " Min" and you are using the battery
to power the camcorder, the Auto Power Off function turns the
camcorder off before Demo can run.
Downloaded From VideoCamera-Manual.com Manuals
) Setting
Demo
Off
On
1/1
), SMART AUTO, MODE, PHOTO, etc.).
Anynet+ (HDMI-CEC)
This camcorder supports Anynet+. Anynet+ is an AV network
system that lets you control all connected Samsung AV devices with
an Anynet+ supported Samsung TV remote control.
1.
Touch the Menu (
( ) tab "Anynet+ (HDMI-
CEC)."
2.
Touch the desired submenu item.
3.
To exit the menu, touch the Exit
(
) or Return (
Submenu items
•
Off: Disables the function.
•
On: T he Anynet+ function is enabled.
When the camcorder is connected to an Anynet+
supported TV, you can operate some functions of the
camcorder using the TV's remote control.
) tab for 5
•
When you turn on the camcorder and it is connected by an HDMI
cable to a TV that supports Anynet+, the TV automatically turns on.
If you do not want to use the Anynet+ function, set the "Anynet+
(HDMI-CEC)" to "Off."
•
For details on the Anynet+ (HDMI-CEC) function, refer to the user
manual of Samsung's Anynet+ supported TV.
System setting
) Setting
Anynet+ (HDMI-CEC)
Off
On
1/1
) tab.