Using The Touch Panel - Samsung HMX-M20N User Manual

basic operation of the camcorder
Checking the remaining battery and recording capacity
• When the power is off, press and hold the display (
button.
• When the power is on, press and hold the display (
button for about 3 second.
• The remaining battery time and the available recording time
appear for about 10 seconds according to the storage and quality
setting values.
• Battery information is available only when the battery pack is inserted in your camcorder.
• If you are using the AC Power adaptor to power the camcorder, and you do not have the battery
inserted, the "No Battery" message appears.

USING THE TOUCH PANEL

The touch panel allows you to enjoy playback and recording with a simple touch of your finger.
Place your hand on the rear side of the LCD screen to support it.
Then, touch the items displayed on the screen.
• Do not place a protective film on the LCD screen.
• If a film is applied for a long while, strong cohesion on the surface of the screen may cause a
malfunction of the touch panel.
• Be careful not to accidentally press the buttons near the LCD panel while using the touch panel.
• If a film is attached for a long time, strong adhesion between the film and the surface of the screen
32
may cause a malfunction of the touch panel.
Q. MENU
85
STBY 00:00:00 [80Min]
MIN
Touch panel
Remaining battery (approx.)
/ CHECK)
Battery
/ CHECK)
85 Min
Card
(HD 1080/60i F)
80 Min
Available recording
time (approx.)
Remaining battery (approx.)
MODE
0% 50% 100%