Safety Information - ETEKCITY ESW01-EU Manual

Safety Information

IMPORTANT: Please read, understand, and comply with all of the instructions provided in this manual before
using the device. Failure to comply with the instructions given in this manual and/or using the device in ways
other than the ones mentioned in this manual may result in serious injury and/or damage to the product.
Do not exceed the maximum load current of
•
10A (approximately 2300W). Always check the
electrical power before use to avoid potential
damage to the device.
Do not use for or near space heaters or air
•
conditioning units.
Keep out of reach of children.
•
The outlet is for indoor use only. Avoid exposure
•
to high-temperature sources, direct sunlight,
and moisture. The outlet is best used in areas
with good air circulation.
To avoid short circuiting, keep the outlet out of
•
direct/indirect contact with water and liquids.
Do not install the outlet in washrooms,
•
restrooms, and any other damp environments.
When cleaning, use a dry cloth to wipe the
•
outlet's surface.
The VeSync home automation app is only
•
compatible with Android 4.3 / iOS 8.0 operating
systems and above.
The VeSync app does not support every phone/
•
tablet. Only use Android 4.3 / iOS 8.0 or above.
The outlet does not support 2G/3G/4G networks
•
for configuration.
Before configuration, make sure the wireless
•
network is operating normally in order to avoid
adverse effects on the product operation.
EN
3