Kohler MAXISPACE Installation Instructions Manual
Kohler MAXISPACE Installation Instructions Manual

Kohler MAXISPACE Installation Instructions Manual

Mirrored cabinet

Advertisement

Quick Links

BEFORE YOU BEGIN

BEFORE YOU BEGIN
!
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation . This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
!
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China. reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
!
These instructions contain important care, cleaning, and
warranty information-
consumer.
!
Before installation carefully inspect the new fixture for any
signs of damage.
!
This product complies with GB/T10357.4-2013,
GB/T10357.5-2013 and GB24977-2010.
WARNING: Risk of injury or product damage.
careful when opening the door to avoid pinching
fingers.
WARNING:
Don't use acidic or alkalic cleaners or
alcohol to clean the surface. Use a dampened cloth to
clean.
CAUTION: Risk of electric shock.
may need to be relocated.
CAUTION: Risk of property damage.
(not provided) rated for the loaded weight of this
product. Refer to the anchor manufacturer's
instructions.
Important Information:
either right or left door swing. Check the wall cavity for
obstructions.
ZHONGSHAN KOHLER SHOWER CO., LTD.
DEVELOPMENT ZONE, ZHONGSHAN, GUANGDONG, CHINA
1261996-T01-B
please leave instructions for the
Electrical wiring
Use anchors
This cabinet is designed for
!
!
!
!
!
GB24977-2010
Be
NO13-1, XINYE ROAD, ZHONGSHAN TORCH
©
Copyright Kohler China Investment Co., Ltd. 2017
-1-
©
MAXISPACE
Installation INSTRUCTIONS
MIRRORED CABINET
K-96106T-R/K-96106T-L/K-96107T
GB/T10357.4-2013
GB/T10357.5-2013
POST CODE: 528437
13-1
528437
-
2017

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MAXISPACE and is the answer not in the manual?

Questions and answers

Summary of Contents for Kohler MAXISPACE

  • Page 1 All information in these instructions is based upon the latest product information available at the time of publication. Kohler China. reserves the right to make changes in product characteristics, packaging, or availability at any time without notice.
  • Page 2 2PCS 5PCS Storage, Plastic Glass Shelves Holedr, Dryer, Assy. Side Mirror 256*118*6mm 1PCS( 2PCS 2PCS( ROUGHING-IN Reference Value UNIT : mm Mirrored Cablnet K-96106T-L( K-96106T-R( Mirrored Cablnet K-96107T( Kohler reserves the right to change marked dimensions without prior notice. 1261996-T01-B...
  • Page 3 Item Electrical Function Type Descripetion Fixate Place Defogger Back of outer-mirror Input: 220V 50Hz, Pmax=30W Lighting Top of inner cabinet Input: 220V 50Hz, Pmax=6W, LED 3000K Power Outlet Bottom of inner cabinet Input: 220V 50Hz, 10A CABINET INSTALLATION CABINET INSTALLATION Drill holes Drill holes 4- 6mm...
  • Page 4 Install mounting bar. Take out the mounting bar and put level. Drill holes according to the hole spaces. STEP Fix the cabinet 1. Put the cabinet on the mounting bar. 2. Insert top clips from the center of the top. Slide the clips to align with the drilled holes. Fix with screws. Top Clip Cabinet Mounting Bar...
  • Page 5 Adjust the door (only necessary if the door does not completely match the cabinet when it is closed). Door adjustments Remove the hinge cover or the blumotion before adjustion, see Fig A. Adjust the hinge of door in 3 directions to make sure the door level as shown in Fig.B. Assemble Assemble Removal...
  • Page 6 Install glass shelf 1. Insert the snap-in pins into the side holes. 2. Insert the glass shelf into the snap-in pins. as shown in the left illustration. In case the door opening angle is not enough, insert the glass shelf vertically upwards and then rotate to horizontal position, as shown in the right illustration.
  • Page 7 Install accessories and side mirror as shown. 1. Align the side mirror with the top and bottom of the cabinet. Clean the back of the mirror. 2. Peel off the double-sided tape and press onto the side mirror for 30 seconds. Note: 1.
  • Page 8 Connect to power line 1. Open the wire box and pull out the terminal block. 2. Put the terminal block back after connecting the power lines and then close the wire box. Note: 1. LED light will be brighter when cabinet Light, Defogger Wire Input(three-core cable) door is closed and dimmer when cabinet...

Table of Contents