Befaco Hexmix System User Manual page 6

H E X M I X S Y S T E M
E X T E N D E D
R E F E R E N C E
5
U S E R M A N U A L
T H E C H A N N E L S T R I P
EQ
Equalization is the process of changing the
spectral content of a sound dividing the spectra
in bands and altering the gain of these bands by
amplify or attenuate.
Each channel of the Hexmix has a three band EQ
with level controls for Low (1 00Hz), Mid (1 Khz)
and High (1 00Khz) band frequencies. in a range
of +/-1 2dB. This results in a sharp response and
a bit agressive character. You can check this in
the following graphic.
Mute
When audio signal is muted, his volume is
turned off.
In Hexmix, the mute is made by a Vactrol based
circuit. This topology provides a little release,
wich provide a nice touch when used in its
momentary function.
Mute is activated by a three position switch:
Up: The signal stays on.
Center: Mute
Down: This position is momentary, so when the
switch is released it returns to mute position.
H E X M I X