Befaco Hexmix System User Manual page 5

H E X M I X S Y S T E M
E X T E N D E D
R E F E R E N C E
The signal passes through various process on channel before being sent to the master section. All of this
process are located and controlled at each Channel Strip.
The Channel Strip is divided in four basic sections, that will go in the following order: EQ, volume, Mute and
Pan.
4
U S E R M A N U A L
T H E C H A N N E L S T R I P
Inputs
Inputs for every channel are located at left side
of Hexmix. Each jack is normalized to VCA
Expander connection, so if you have a Hexmix
VCA connected via the expansion port, you will
have the output of each VCA to every input.
connecting a jack in any input will disconnect
whatever is coming from VCA.
Pan
Pan (or panning) is the spread of a monoaural
signal in a stereo sound field (L-R). At one
extreme, the sounds appears in only one channel.
In the middle, the sound is decreased in that
channel by 3dB, and the other channel is
brought up to the same level, so that the overall
sound power level is always constant.
Volume
The amount of audio level. If the volume
increases, the audio level will increase, which
results in a louder sound.
H E X M I X