Table of Contents
Advertisement
Fig. 3.3
Fridge Temperature Settings
• The initial temperature of the setting display is 5°C.
• Press fridge setting button once.
• Every time you press the button, the setting
temperature will increase. (2°C, 4°C, 5°C, 6°C, 8°C, Super
cooling)
• If you press fridge setting button until super cooling
symbol is displayed on your fridge.
• After 3 seconds the wuper cooling light will blink.
• If you keep on pressing, it will restart from last value.
Temperature Settings Warnings
• It is not recommended that you operate your fridge in
environments colder than 10°C in terms of its efficiency.
• Do not start another adjustment before completing one
adjustment.
• Temperature adjustments should be made according
to the frequency of door openings, the quantity of food
kept inside the fridge and the ambient temperature in
the location of your fridge.
• When you first switch on the appliance, allow it to
operate for 24 hours in order to reach normal operating
temperature.
• During this time, do not open the door or place a lot of
food inside the appliance.
• If the appliance is switched off or unplugged, wait at
least 5 minutes before plugging the appliance in or
restarting it this will prevent damage to the compressor.
• Your appliance is designed to operate in the ambient
temperature (T/SN = 10°C - 43°C) intervals stated in
the standards. We do not recommend operating your
appliance out of the stated temperature limits in terms
of cooling effectiveness.
Even-circ(Fig. 3.3)
Do not block the air inlet and outlet openings when storing
food, otherwise air circulation provided by the turbo fan will
be impaired.
6
Advertisement
Table of Contents
