Resetting The Device To Factory Settings; Specifications - Cisco Smart+Connected Remote 250 Reference Manual

Resetting the Device to Factory Settings

Figure 1-12
•
•
•
Resetting the Device to Factory Settings
To reset all settings to the factory defaults and leave the ZigBee network:
Press Room Off, #,*,1,3,4,1,3.

Specifications

Table 2
Basic Specifications
Buttons
Total Buttons
Quick Access Control Buttons
Context Sensitive Programmable Buttons
Transport Control Buttons
Remote Display
LED Display
Cisco Smart+Connected Remote 250 Reference Guide
14
Paging
Beep until button press—The Cisco Remote beeps until you press one of its buttons.
Beep for X seconds (<254)—The Cisco Remote beeps until X seconds have elapsed, or you press
one of its buttons.
Stop Beep—The Cisco Remote stops beeping.
Cisco Remote 250 Specifications
Description
47
2
4
8
Backlit OLED
OL-27366-02