More Information Screen; Set Point Change - CRC -RPM User Manual

MAIN SCREEN
TOUCH anywhere on Main Screen to bring up
MODE and MORE INFO button
Press the "MORE INFO" button to access the
More Info Screen
NOTE: If one or more of the points on the
secondary screen is in alarm or has been muted,
then the "MORE INFO" button will look like this:
MORE INFO. SCREEN
Primary Room Name
Status Icons:
= = N/A
= = Audible Alarm
Secondary Room Name
Set Point Adjustment Icon. Only shows if Set
Point Adjustment is enabled in the Admin Menu

SET POINT CHANGE

Increase / Decrease set point buttons
Click "APPLY" button to save Set Point changes
Room Pressure Monitor and Controller - User Guide
:
P P AT PAT PATIENT ROOM P TIENT ROOM
= OK =
= Alarm (Mute) =
ANTE ROOM ANTE ROOM ANT
EXIT EXIT
PATIENT ROOM PAT P IENT ROOM
PATIENT ROOM PATIEN
ANTE ROOM AN
EXIT EXIT
CLICK "MORE INFO" BUTTON
TEMPERATURE:
HUMIDITY: 0.00°C
AIRCHANGE: 0.0 ACH
EXHAUST FLOW: 0 CFM
TEMPERATURE:
TVOC: 0.0000 PPM
HEPA DP: 0.000" WC
EXHAUST FLOW: 0 CFM
CLIC CLICK " " " BUTTON
TEMPERATURE: TEMPERA 120°
HUMIDITY: 0.00°C HUMIDITY
AIRCHANGE: 0.0 ACH AIRCHAN
N N T R T R T R T R T T R R R R ROO OOM OOM OOM OOM OOM OOM OOM OOM
EXHAUST FLOW: 0 CFM
66 0° 66.0°
TEMPERATURE: 120°
TVOC: 0.0000 PPM
APPLY A
CANCEL
HEPA DP: 0.000" WC
EXHAUST FLOW: 0 CFM
© 2012 CRITICAL ROOM CONTROL
SP: 0.0°
120°
SP: 0.00°C
SP: 0 CFM
SP: 0.0°F
120°
SP: 0 CFM
SP: 0.0°
SP: 0.00°C
SP: 0 CFM
SP: 0.0°F
SP: 0 CFM