Sanwa PDR4000 Instruction Manual page 17

Operating
environmental
conditions
Operating
temperature/
humidity ranges
Storage temperature/
humidity range
Power supply
Auto Power Off
Power consumption
Possible number of
measurements
Dimensions & mass
Year of production
IP rate
Standard
EMC, RoHS
Accessory
Optional accessory
Altitude 2000 m or below, indoor use, pollution
degree II
0-40 ºC, max. relative humidity 85 % (no
condensation)
-20-60 ºC, max. relative humidity 90 %,
no condensation (with batteries removed)
(Batteries should be removed before storage
for a long period.)
R6P 1.5 V × 6pcs
Power OFF in about 10 minutes after last
operation.
Approx. 18 VA (measurement at 5000 V/
approx. 1.8 MΩ)
4000 times
3-pole method measure 10 Ω, 5 seconds
continuous, 25 seconds interval
163(H) × 102(W) × 50(D) approx. 440 g(incl.
batteries)
Initial 2 digits of the main unit serial No.
indicate the last two digits of year (20**).
IP30
IEC61010-1 CAT.II 400 V/III 300 V
IEC61010-2-030, IEC61010-2-033,
IEC61010-031
IEC61557-1, -5
IEC61326(EMC) , EN50581(RoHS)
TL-67: Test lead set (black 5 m x 1pc., blue
10 m x 1pc., red 15 m x 1pc.)
CL-ER4000: Auxiliary earth electrode x
2pcs
C-PDR4000: Carrying case
Manual
Battery: R6P(1.5 V) x 6pcs.
For 2-pole method: TL-68
− 15 −