Adjusting The Output Support; For Letter-Sized Paper; For A4- Or Legal-Sized Paper; Setting The Paper Size And Type - Samsung CLX-6200FX User Manual

ADJUSTING THE OUTPUT SUPPORT

The printed pages stack on the output tray, and the output support will help
the printed pages to align. For the output support to correctly align the
pages, you need to pull it out appropriately depending on the paper size.
• If the output support is incorrectly adjusted, printed pages may be
mis-aligned or fall.
• If you continuously print many pages, the surface of the output tray
may become hot. Be careful not to touch the surface, and
especially keep out of children's reach.

For Letter-sized paper

Pull out the output support to the location indicated LTR as shown, and
unfold the extension.

For A4- or Legal-sized paper

Pull out the output support to the location indicated A4, LGL as shown, and
unfold the extension.
38 _Loading originals and print media

SETTING THE PAPER SIZE AND TYPE

After loading paper in the paper tray, you need to set the paper size and
type using the control panel buttons. These settings will apply to Copy and
Fax modes. For PC-printing, you need to select the paper size and type in
the application program you use on your PC.
1. Press Menu (
2. Press the left/right arrow until Paper Setup appears and press OK.
3. Press OK when Paper Size appears.
4. Press the left/right arrow until the paper tray you want appears and
5. Press the left/right arrow until the paper size you are using appears and
6. Press Back (
7. Press the left/right arrow until Paper Type appears and press OK.
8. Press the left/right arrow until the paper type you are using appears and
1 Output support
2 Extension
9. Press Stop/Clear to return to ready mode.
) until System Setup appears on the bottom line of the
display and press OK.
press OK.
press OK.
) to return to the upper level.
press OK.
If you want to use special sized paper such as a billing paper, select
Custom in the Paper tab in the printer propeties. See Software
section.