Configuring Network Protocol Via The Machine; Using The Setip Program; System Requirements; Windows - Samsung CLX-6200FX User Manual

Configuring network protocol via the machine

You can set up TCP/IP network parameters, follow the steps listed below.
1. Make sure your machine is connected to the network with an RJ-45
Ethernet cable.
2. Make sure you have turned on the machine.
3. Press Menu ( ) on the control panel, until you see Network on the
bottom line of the display.
4. Press OK to access the menu.
5. Press the left/right arrow until TCP/IP displays.
6. Press OK.
7. Press the left/right arrow until Static displays.
8. Press OK.
9. Press the left/right arrow until IP Address displays.
10. Press OK.
Enter a byte between 0 and 255 using the number keypad and press the
left/right arrow to move between bytes.
Repeat this to complete the address from the 1st byte to the 4th byte.
11. When you have finished, press OK.
Repeat steps 9 and 10 to configure the other TCP/IP parameters:
subnet mask and gateway address.
Contact the network administrator if you are not sure how to configure.
You can also set up the network settings through the network
administration programs.
• SyncThru™ Web Admin Service: Web-based printer
management solution for network administrators. SyncThru™
Web Admin Service provides you with an efficient way of
managing network devices and lets you remotely monitor and
troubleshoot network machines from any site with corporate
internet access. Download this program from
solution.samsungprinter.com.
• SyncThru™ Web Service: Web server embedded on your
network print server, which allows you to:
- Configure the network parameters necessary for the machine to
connect to various network environments.
- Customize machine settings.
• SetIP: Utility program allowing you to select a network interface and
manually configure the IP addresses for use with the TCP/IP protocol.

Using the SetIP program

This program is for the network IP setting using the MAC address which is
the hardware serial number of the network printer card or interface.
Especially, it is for the network administrator to set several network IPs at
the same time.
Installing the program
1. Insert the driver CD provided along with your machine. When the driver
CD runs automatically, close the window.
2. Start Windows Explorer and open the X drive. (X represents your CD-
ROM drive.)
3. Double click Application > SetIP.
4. Open the folder of the language you plan to use.
5. Double click Setup.exe to install this program.
6. Follow the instructions in the window and complete the installation.
26 _Getting started
Starting the program
1. From the Windows Start menu, select All Programs > Samsung
2. Select the name of your printer and click
3. Enter the network card's MAC address, IP address, subnet mask,
4. Click OK to confirm the settings.
5. Click Exit to close the SetIP program.

SYSTEM REQUIREMENTS

Before you begin, ensure that your system meets the following
requirements:

Windows

Your machine supports the following Windows operating systems.
Windows 2000
Windows XP
http://
Windows Server
2003
Windows Vista
Windows Server
2008

Macintosh

Mac OS X
10.3 ~ 10.4
Mac OS X 10.5 •
Network Printer Utilities > SetIP.
If you cannot find your printer name, click
default gateway, and then click Apply.
If you do not know the network card's MAC address, print the
machine's network information report. (See "Printing reports" on
page 62.)
REQUIREMENT (RECOMMENDED)
OPERATING
SYSTEM
CPU
Pentium II 400 MHz
(Pentium III 933 MHz)
Pentium III 933 MHz
(Pentium IV 1 GHz)
Pentium III 933 MHz
(Pentium IV 1 GHz)
Pentium IV 3 GHz
Pentium IV 1 GHz
(Pentium IV 2 GHz)
• Internet Explorer 5.0 or higher is the minimum requirement for all
Windows operating systems.
• Users who have an administrator right can install the software.
• Windows Terminal Services is compatable with this machine.
REQUIREMENT (RECOMMENDED)
OPERATING
SYSTEM
CPU
• Intel Processor
• Power PC G4 /
G5
Intel Processor
• 867 MHz or
faster Power
PC G4 /G5
.
to refresh the list.
FREE HDD
RAM
SPACE
64 MB 600 MB
(128 MB)
128 MB 1.5 GB
(256 MB)
128 MB 1.25 GB to
(512 MB) 2 GB
512 MB 15 GB
(1024 MB)
512 MB 10 GB
(2048 MB)
FREE HDD
RAM
SPACE
• 128 MB for a 1 GB
Power-PC based
Mac (512 MB).
• 512 MB for an
Intel-based Mac
(1 GB)
512 MB (1 GB) 1 GB