Assembly; Cleaning, Maintenance And Storage - ALDI 55902 User Manual

Cordless Drill Driver Kit · 20v Lithium-Ion Battery

Assembly

1 Attach the belt hook
Use a screwdriver to attach the belt hook by screw that provided as shown in Fig. B.
2 Insert and remove the battery pack
WARNING! Before inserting or removing the battery pack, make sure the
appliance is switched off .
a) To insert the battery pack, align the battery pack with the drill base and slide the battery
pack into the drill, so that the battery pack is locked in position.
b) To remove the battery pack, press the battery's release button and pull the battery pack
off at the same time.
3 Insert and remove a drill bit
a) Lock the chuck by setting the forward/reverse
selector to the center.
b) Open the chuck by turning it anti-clockwise;
make sure "selector" aligns with the above work lock
c) Insert the drill bit into the chuck.
d) Firmly tighten the chuck by turning it clockwise.
e) Open the chuck by turning it anti-clockwise to
remove the drill bit.
4 Adjusting the torque
WARNING! Never adjust the torque whilst the drill is running. Always let it
come to a complete stop first.
15
support@merotecusa.com

Cleaning, Maintenance and Storage

Fig. B
Fig. C
Fig. D
AFTER SALES SUPPORT
1866 902 9690