Yamaha P-515 Owner's Manual page 105

 Backup Setting
(Selecting parameters maintained even when the
power is turned off)
This lets you set whether some settings of the Backup
Setting (below) are maintained or not when the power
is turned off. The Backup Setting consists of two
groups, "Voice" (including Voice related settings such
as Voice selection) and "Other" (including various
settings such as Song Repeat and Tuning), which can
be set individually.
Data and settings maintained even when the
power is turned off
• User MIDI Song (saved in this instrument's
"User" memory)
• Bluetooth* ("System" menu)
• Utility ("System" menu)
• Backup Setting (explained here)
* For information on whether Bluetooth functionality
is included with the instrument or not, refer to
page 8.
1.
Press the [FUNCTION] button several times
to select "System" menu.
2.
Use the [ ]/[ ] buttons to select "Backup,"
u d
use the [>] button to call up the next display,
then press the [ ] button to select "Backup
u
Setting."
3.
Use the [>] then the [
"Voice," then use the [>] button to select "On"
or "Off."
Each "Voice" contains the following settings:
• Voice selection for R1, R2 and L
• All the parameters other than Transpose in the
"Voice" menu
4.
Press the [ ] button to select "Other," then
d
use the [>] button to select "On" or "Off."
The "Other" contains the following settings:
• In the "Song" menu: Song Repeat, Song-Keyboard,
Audio Volume, Quick Play, Play Track
• In the "Metronome/Rhythm" menu: Volume, BPM,
Bell On/Off, Bass, Intro, Ending
• In the "System" menu: Tuning, Keyboard (except
"Duo"), Pedal, Sound, MIDI
• Sound Boost, Master EQ
5.
Press the [EXIT] button to exit from the
"System" menu display.
] button to select
u
 Backup
(Saving the Backup file for internal data)
This lets you save data on internal memory to the
connected USB flash drive as a backup file (named "p-
515.bup"). This backup file can be loaded to the
instrument via the Restore function (page 106) for
future.
NOTICE
• It may take 1 – 2 minutes to complete this operation. Never turn
off the power during this operation (while "Executing" is shown).
Doing so could result in damage to the data.
• If the same backup file (p-515.bup) is already saved in the USB
flash drive, this operation will overwrite or replace this file with
new one.
1.
Connect the USB flash drive to the [
(USB TO DEVICE) terminal.
2.
Press the [FUNCTION] button several times
to select "System" menu.
3.
Use the [ ]/[ ] buttons to select "Backup,"
u d
use the [>] button to call up the next display,
then use the [ ]/[ ] buttons to select
u d
"Backup."
4.
Use the [>] button to call up the next display,
then press the [ ] button to select "Execute."
d
5.
Press the [>] button to execute the Backup
operation.
6.
Press the [EXIT] button to exit from the
"System" menu display.
NOTE
When you want to restore the settings in the backup file, execute
the Restore function (page 106).
NOTE
Protected Songs cannot be backed up.
System Menu
]
105
P-515 Owner's Manual