Yamaha P-515 Owner's Manual page 103

The following menu is shown only when you connect the USB wireless LAN adaptor to the [
TO DEVICE) terminal on this instrument.
Menus marked with * differ in the Wireless LAN Mode parameters between the two modes: "Infrastructure" and "Accesspoint. " The default setting for the Wireless
LAN Mode is "Infrastructure. "
To call up the desired parameter:
Press the [FUNCTION] button several times to select "System" menu, then use the [
parameter.
[>] [>]
[<] [<]
Utility Wireless LAN* Select
(In the Network
"Infrastructure"
mode)
Detail
Wireless LAN Wireless LAN
Option* Mode
Initialize
Detail
[>] [>] [>]
[<] [<] [<]
(Networks)
Other SSID
Security
Password Sets the Password.
Connect
DHCP
IP Address
Subnet Mask
Gateway
DNS Server1
DNS Server2
Save
Infrastructure Mode
Accesspoint Mode
Cancel
Execute
Host Name
Mac Address
Status
]/[ ]/[<]/[>] buttons to select the desired
u d
Description
Connects to an access point by
selecting the network.
Sets the SSID.
Sets the Security.
Connects using the settings in
"Other" display.
Sets the wireless LAN detailed
settings. IP Address, Subnet
Mask, Gateway, DNS Server1,
DNS Server2 can be set when
DHCP is set to Off while cannot be
set when DHCP set to On. Use the
[<]/[>] buttons to select each
octet in the entry display, then
enter the value using the [ ]/[ ]
u d
buttons. To finalize the setting,
press the [FUNCTION] button.
Saves the settings in the "Detail"
display. Move the highlight to
"Save," then press the [>] button
to execute the Saving.
Determines whether the access
point is used for wireless LAN
connection (Infrastructure Mode)
or not (Accesspoint Mode).
Initializes the settings in the
"Wirelss LAN" display. Move the
highlight to "Execute," then press
the [>] button to execute the
initialization.
Sets the Host name.
Displays the MAC address of the
USB wireless LAN adaptor.
Displays the error code of network
function.
System Menu
] (USB
Default
Setting range
setting
– –
– Up to 32 characters (half
size), alphanumeric
characters, marks
None None, WEP,
WPA2-PSK (AES),
WPA/WPA2 mixed PSK
– Up to 64 characters (half
size), alphanumeric
characters, marks
– –
On On/Off
0.0.0.0 0.0.0.0-255.255.255.255
0.0.0.0 0.0.0.0-255.255.255.255
0.0.0.0 0.0.0.0-255.255.255.255
0.0.0.0 0.0.0.0-255.255.255.255
0.0.0.0 0.0.0.0-255.255.255.255
– –
Infrastructure –
Mode
Cancel –
[P515]-[xxxxxx Up to 57 characters (half
(MAC address size) including
lower 6 figure)] alphanumeric
characters, the
"_" (underscore) and
"-" (hyphen) character.
– –
– –
P-515 Owner's Manual
103