Yamaha P-515 Owner's Manual page 63

3.
Select the desired MIDI Song.
For instructions, refer to page 45.
4.
Specify the start point you wish to re-record.
Use the [<]/[>] buttons to move the playback position (measure number)
to the desired point. Alternately, press the [PLAY/PAUSE] button to start
playback, then press the [PLAY/PAUSE] button again slightly prior to the
desired point.
If necessary, select the settings (Voice and other parameters).
Select the desired settings, if you wish to change the previous ones.
5.
Press and hold the [REC] button for a second to call up the
display which lists the Recording Target Songs, then select
the 4th item (Song selected in step 3), then press the [>]
button to enter the recording mode.
6.
Use the [<]/[>] buttons to select a Track for re-recording.
7.
Play the keyboard or press the [PLAY/PAUSE] button to
start recording.
8.
Press the [REC] button to stop recording.
9.
Save the recorded performance by following step 5 on
page 56.
10.
To hear the recorded performance, press the [PLAY/
PAUSE] button.
Recording Your Performance
NOTE
The time signature cannot be
changed when replacing the
part of an existing Song.
P-515 Owner's Manual
63