Yamaha P-515 Owner's Manual page 50

Playing Back Songs
AB Repeat setting
MIDI Audio
Specify the repeat range.
4-
1.
Press the [PLAY/PAUSE] button to start Song playback.
4-
2.
Press the [>] button at the starting point (A) of the range
to be repeated.
"A-B" display
4-
3.
Press the [>] button again at the ending point (B).
After an automatic lead-in (to help guide you into the phrase), the
range from Point A to Point B is played back repeatedly.
5.
To turn off the Repeat function, press the [>] button
while "Repeat Off " is highlighted, or select another Song.
50
P-515 Owner's Manual
Specifying the top of a
Song as Point A
Specify Point A before starting
playback, then start playback
and specify Point B.
Specifying the end of a
Song as Point B
Specifying only Point A results
in repeat playback between
Point A and the Song end (as
Point B).
NOTE
You can also specify the repeat
range by the following
procedure.
1
Highlight the measure
number using the [ ] button,
u
then fast-forward the Song to
Point A using the [<]/[>]
buttons.
2
Highlight "Set A" using the
[ ] button, then press the [>]
d
button.
After specifying Point A, the
display for specifying Point
B is called up.
3
Specify Point B in the same
way as Point A.