Erasing A Waypoint - Raytheon HSB L760 Owner's Handbook Manual

5-12
4. To edit the waypoint name, press the NAME soft key.
The NAME WAYPOINT window is displayed.
Use the trackpad to enter or edit the name:
Use the left or right side of the trackpad to move the cursor to the character
you wish to change.
Use the top or bottom of the trackpad to scroll through the characters.
When you have finished editing the name, to remove the window, press
ENTER to save the name or CLEAR to cancel the operation. The waypoint
name replaces the waypoint number.
Press ENTER or CLEAR to return to the default soft keys.
5. To edit the waypoint position, press the EDIT WAYPOINT soft key, followed
by POSITION. The Waypoint Position pop-up is displayed.
EDIT
WAYPOINT
Use the soft keys to select LAT, LON, BRG or RNG.
Use the trackpad to edit the value:
Use the left or right side of the trackpad to move the cursor to the character
you wish to change.
Use the top or bottom of the trackpad to scroll through the characters.
Adjust each parameter until the waypoint position is correct.
When you have finished editing the position, press ENTER to save the position
or CLEAR to cancel the operation. Press ENTER or CLEAR again, the
Waypoint Position window is removed from the screen and the default soft
keys are displayed.

Erasing a Waypoint

You cannot erase the target waypoint or waypoints that are used in routes.
However, you can remove a waypoint from the current route - see Editing a
Route on page 5-21.
If you try to erase a waypoint that is used in a saved route you are warned
"WAYPOINT IS USED IN A ROUTE & CANNOT BE DELETED"
➤
To delete a waypoint using the cursor:
1. Move the cursor over the waypoint, until the letters WPT are displayed. The
WPT
waypoint soft keys are displayed.
2. Press the ERASE WAYPOINT soft key. The waypoint is removed from the
ERASE
WAYPOINT
screen and the Waypoint List is updated.
Note: If you have stopped a GOTO (see Stop Follow or Stop Goto on
page 5-28), the target waypoint remains displayed as a target; you need to use
the CLEAR GOTO soft key before you can erase the waypoint using the cursor.
HSB Series L755 and L760 Fishfinder