BATTERY & CHARGING
CHARGING THE BATTERY
The battery can be charged both on and off of the bike.
Please identify your charging port (figure 14.1).
First plug the chargers male plug into the battery, then plug the chargers 110
volt plug into your wall outlet. (Do not use an extension for 110 volt.)
The indicator on the charger will light green for a few seconds and
if a charge is necessary, the LED will turn red. The battery is fully
charged when the battery indicator LED becomes green.
Unplug the charger from the wall first, and then from the battery.
If the battery is not mounted to the bike you can always
check the battery level as seen in figure 14.2.
Fig. 14.1
ATTENTION! Make sure to only charge the
battery in a dry, well ventilated area.
ATTENTION! Unplug the charger when the battery
is fully charged, or when charger is not in use.
ATTENTION! When the battery is completely depleted you
must charge it immediately. If the cells are left depleted for a
long period of time, they may become irreparably damaged.
14
Fig. 14.2
w w w . i g o e l e c t r i c . c o m
Need help?
Do you have a question about the Fat Folding and is the answer not in the manual?
Questions and answers