Basic Operation - Marantz ZC4001 User Manual

BASIC OPERATION

TURNING THE POWER ON
1. 2.
STANDBY
1 .
POWER
ON/STANDBY ON/STANDBY
1.
Press the POWER button to turn the power
ON.
When the power turns ON, the ZC4001
resumes the same status that existed when
power was turned OFF the last time.
2.
Press the POWER button again to set the
ZC4001 on standby.
Caution:
Power to the ZC4001 is always ON (standby
state) while the AC power cable is connected to a
wall electrical outlet.
To completely shut OFF the power, unplug the
AC power cable from the wall electrical outlet.
However, if the AC power cable is left unplugged
for an extended period of time, the clock resets
and the time must be set again.
ADJUSTING THE VOLUME
1.
1 .
1.
Press the VOLUME / buttons to adjust
the volume.
Pressing the VOLUME button increases
the volume.
Pressing the VOLUME button decreases
the volume.
Volume can be adjusted in the (Min.) 01 -
(Max.) 79 range.
Pressing and holding the VOLUME
buttons increases or decreases the volume
rapidly.
MUTE
Pressing the MUTE button temporarily mutes the
sound from the speakers.
Pressing the MUTE button again cancels the mute
and restores the original volume level.
1 .
LISTENING OVER THE PLC
Check the settings of the ZR6001.
Using the OSD menu system of the ZR6001, set
"MULTI PLC SERVER" to "ON".
For details, see the ZR6001 User's Guide.
ZR6001 ON SCREEN DISPLAY MENU SYSTEM
9 MU L T I P L C
MU L T I P L C S E R V E R : ON
CONN E C T I ON MOD E :
AU T O
H I GH AUD I O QUA L I T Y
H I GH R E L I AB I L I T Y
GP I D S E T T I NG : S T AR T
MA I N
1. LISTENING TO THE TUNER
/
1. 2. 3. 4.
STANDBY STANDBY
1 .
POWER POWER
ON/STANDBY ON/STANDBY
1.
Press the TUNER button.
2.
To switch between FM and AM, press the
TUNER button again.
3.
To select a station, use the /
4.
To select a preset station, use the
buttons. (With the ZR6001, this works only
when stations have been preset.)
2. LISTENING TO SOURCES OVER THE PLC (CD,
TAPE, CDR, DVD, TV, VCR1, DSS OR AUX1)
To listen to these sources, the ZR6001 must be
connected to the unit and set accordingly. For
details, see the ZR6001 User's Guide.
1. 2.
1 .
E X I T
1.
Press the button of the desired source.
2.
Operate the source with the PLAY, STOP,
PAUSE, , , and
3. LISTENING TO SOURCES CONNECTED TO EXT
INPUT
1.
1 .
1.
Press the EXT. button.
buttons.
2.
Operate the unit connected to the EXT INPUT
jack on the rear panel.
/
2.
buttons.
9