Air Filter And V-Belt Case Air Filter Elements - Yamaha GT 125 2017 Owner's Manual

6. Install the final transmission oil
drain bolt and its new gasket, and
then tighten the bolt to the speci-
fied torque.
Tightening torque:
Final transmission oil drain bolt:
13 N·m (1.3kgf·m, 9.4 lb·ft)
7. Refill with the specified amount of
the recommended final transmis-
sion oil. WARNING! Make sure
that no foreign material enters
the final transmission case.
Make sure that no oil gets on
the tire or wheel.
[EWA11312]
Recommended final transmission
oil:
See page 9-1.
Oil quantity:
0.10 L (0.11 US qt, 0.09 Imp.qt)
8. Install the final transmission oil fill-
er cap and its new O-ring, and
then tighten the oil filler cap.
9. Check the final transmission case
for oil leakage. If oil is leaking,
check for the cause.
Periodic maintenance and adjustment
Air filter and V-belt case air fil-
ter elements
The air filter element should be re-
placed and the V-belt case air filter el-
ement should be cleaned at the
intervals specified in the periodic main-
tenance and lubrication chart. Service
the air filter elements more frequently if
you are riding in unusually wet or dusty
areas.
Checking and replacing the air filter
element
1. Place the vehicle on the center-
stand.
2. Remove the air filter case cover by
removing the screws.
1
1. Air filter case cover
7-14
EAU60490 3. Remove the air filter element by
pulling it out.
1. Air filter element
4. Check the air filter element for ex-
cessive dirt or damage and re-
place it if necessary.
5. Place the air filter element in its
original position.
6. Install the air filter case cover by
installing the screws.
Cleaning the V-belt case air filter el-
ement
1. Place the vehicle on the center-
stand.
2. Remove the V-belt air filter case
cover by removing the bolts.
1
7