Edic ENDEAVOR Owner's/Operator's Manual page 14

STEP 6.
Once the tip has been installed, push the clear hose back
into place over the hose barb.
STEP 7.
Place your chemical bottles in the bottle holders and
install the threaded intake caps.
SELECTING CHEMICAL:
Use the chemical selector valve to change between the
left side and right side bottle holders. For accurate flow
rates, point the selector valve straight at the bottle holder
you wish to draw from. Place the selector valve at top
dead center to close the injector system. The system will
not draw chemical in the closed position.
LEFT BOTTLE
RIGHT BOTTLE
CLOSED
14