ABB PSTX30 Installation And Commissioning Manual page 53

Scale value range
6.3.2.4
Use Navigation keys to mark Scale value range and press
"Select" to enable Scale value range. Three more
options will then illuminate in the display slotmenu:
• Display signal min as
• Display signal max as
• Display unit
Display signal min as
- Press
scaled minimum value that is to be shown in the Home
view. Use the Navigation keys to change value,
Press "Save" to save the value. See
Display signal max as
- Choose the scaled maximum
value that is to be shown in the Home view. Use the
Navigation keys to change value,
Press "Save" to save the value. See
Display unit
- Type in the unit which is to be displayed
in the Home view. It is possible to type a unit with up to
10 characters. Use the Navigation keys to change the
characters. "Save" to save the Home view unit name.
4
See in Figure 56.
6.3.3 Active faults/protections and
warnings
Path in menu:
Options Active faults / protections
u
Options Active warnings
u
Active faults/protections/warnings are also found in
the Options menu. The menus contain information about
faults and warnings that have occurred during operation,
and what protections that are active.
Active faults/protections and warnings menus are
highlighted black when a fault protection or warning has
occurred.
For navigation see Figure 57.
For more information about fault/warnings/protections,
see chapter 10 Troubleshooting.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
56
"Edit" to choose the
3
in Figure 56.
Figure 56: Display slot
3
in Figure 56.
Figure 57: Active fault/warnings/protections navigation
Local PSTX
1
Motor current
0.0
2
Motor voltage
0.0
Options 12:00
Options
Edit home view
Active faults / protections
Active warnings
Options
Edit home view
Active faults / protections
Active warnings
A
4
3
V
Menu
Warnings
Faults
Protections
6