Table of Contents
Advertisement
2 Hazards, Warnings and Conformance
Before using the part observe the following hazard warnings and precautions and take suitable
preventative measures if necessary.
2.1 Hazardous Voltages
2.2 ESD Precautions
2.3 RoHS
The CAN Interface pHAT (SKU: 1PICA0001) is designed and manufactured to meet the requirements of
the RoHS2 (2011/65/EU) directive. All components used in the construction are lead free and the
soldering processes used during manufacturing (both SMT reflow and hand soldering) use lead free
solder.
2.4 CE Marking
The CAN Interface pHAT is intended to be used as a component sub-assembly for evaluation or
prototyping of the CAN bus controller in a wider system. It does not have a CE mark. It is sold for use by
technically competent individuals and is not intended for general consumer use.
01/06/2018
ATTENTION
The scope of this manual is for the use of the CAN Interface pHAT
with low voltages. No Voltages AC or DC higher than 50V should
be applied to this product.
ATTENTION
The CAN Interface pHAT contains electrostatic sensitive
components. The board is fitted with ESD protective devices for
the connections that would require protection in a complete
system. The board requires a suitable enclosure or cover for full
protection.
Observe precautions for handling static sensitive assemblies &
components at all times during the transportation, handling,
programming and testing of a system containing this circuit
board.
Document Number
IEMAN000001
Document Title
CAN Interface pHAT User Manual
5 of 22
Document Revision
Page
R003
5 of 22
Advertisement
Table of Contents
