3.2.8 Grove Connector
The PCB has an unpopulated Grove connector position present on the board, this will allow a Grove
compatible part to be soldered in. It is up to the end user to determine what this is used for!
This connector is connecter to the same I2C that the RTC clock is connected to.
SCL - Serial Clock, GPIO_03.
•
SDA - Serial Clock, GPIO_02.
•
Figure 10 - Optional Grove Connector
01/06/2018
Document Number
IEMAN000001
Document Title
CAN Interface pHAT User Manual
15 of 22
Document Revision
Page
R003
15 of 22