Instructions For Use - NAUSICAA Weighing System User Manual

The weighing system must be used with a well-balanced and stable load.
Step 7 : SETTING 1 / AUTO OFF (oFF)
- Press _ and _ simultaneously and hold
HOLD TARE
UNIT ZERO
two buttons for 1 second, to enter Setting
Mode.
- Press _ TARE to enter Auto-Off option; and
ZERO
press _ to change Auto-Off option.
HOLD
UNIT
Auto-Off can be set to 0 (disabled), 5 (5
min), 15 (15 min), 30 (30 min), 60 (60 min).
- Push 4 times TARE to exit the setting mode.
ZERO
Step 8 : SETTING 2 / BACKLIGHT (
- Press _ and _ simultaneously and hold two buttons
HOLD TARE
UNIT ZERO
for 1 second, to enter Setting Mode.
- Press 4 times _ to enter Backlight option; and press _ to TARE
ZERO
change Backlight option.
Backlight can be set to off (disabled), 5 (5 sec), 15 (15 sec),
30 (30 sec), 60 (60 sec), on (never).
When Backlight is set to 5, 15, 30, or 60, scale turns off
backlight in corresponding seconds after it is stable.
When Backlight is set to off, backlight is disabled, and
never turns on.
When Backlight is set to on, scale never turns off backlight,
no matter it is stable or not.
TARE
- Push to exit the setting mode.
ZERO
Distributed by NAUSICAA Médical S.A.S. / Approved by Ghizlane Labrosse (Biomedical Engineer)

Instructions for Use

7
L)
B 8
HOLD
UNIT
User Manual : NAUSICAA WEIGHING SYSTEM
oFF 0
SETUP STB ZERO STB ZERO
bLoFF STB ZERO
SETUP STB ZERO
End
STB ZERO
End
STB ZERO
7