Magnavox MTFT716n Owner's Manual page 19

In Video Q uality Setup Page:
1. If Picture is selected, using the Direction and ENTER/OK Buttons to set the panel quality such like
Brightness; Contrast; Hue or Saturation as desired.
2. If Picture Quality is selected, using the Direction and ENTER/OK Buttons to set the picture quality when the
DVD Player connected through AV OUT signal.
3. If Panel Display is selected, using the Direction and ENTER/OK Buttons to set the aspect ratio of the screen to
Wide 16:9 or 4:3 to match the aspect ration of playing video or photos.
In Preference Page:
1.
If TV Type is selected, using the Direction and ENTER/OK Buttons to set to PAL, AUTO or NTSC.
(Note: The TV system in US, Canada and Mexico is NTSC).
2. If Audio, Subtitle or Disc Menu is selected, using the Direction and ENTER/OK Buttons to set the priority
of the available language.
3. If Parental is selected, using the Direction and ENTER/OK Buttons to set the rating level as desired as follows:
►
~
Press the Button to enter, the current rating level will be highlighted.
▲ or ▼
~
Press the Buttons to select the new level as desired.
~ Press the ENTER/OK Butons to enter, password enter window will pop up.
~ Enter the six digit password ( default password is 136900 ) by pressing the Numeric Buttons.
~ Press the ENTER/OK Butons to save the settings and exit.
~ Rate levels:
1. Kid Saf: Kid safe
2. G: All ages
3. Pg: Parental Guidance
4. Pg13: Parental Guidance less than 13 years old
5. Pgr: Under 17 years old, Parental Guidance suggested
6. R: Under 17 years old, Parental Guidance strongly
7. Nc17: 17 years old or above
8. Adult: Adult only
4. If Password is selected, press the ENTER/OK Buttons to enter, the subsetting menu will appear:
~
If Password Mode is selected, using the Direction and ENTER/OK Buttons to set it On (activate the
rating level setting) or Off (Password is needed).
If Password is selected, press the ENTER/OK Buttons twice to enter. The New password setting menu
~
will appear.
> Enter the six digit old password. The Column of NEW Password will be highlighted.
> Enter the new six digit password. The Column of Confirm Pwd will be highlighted.
> Enter the new password again. The OK Button on the screen will be highlighted.
> Press the ENTER/OK Buttons to save the setting and exit.
5. If Default is selected, using the Direction and ENTER/OK Buttons to reset all setting to default setting or
press the SETUP Button to exit without changes.
SYSTEM SETUP
( Function depend the recording of
- 18 -
DVD).
Sharpness;