Setting The Environment Variable - Hitachi AMS2100 User Manual

C:\>cd HORCM\etc
C:\HORCM\etc>echo hd1-7 | .\inqraid
Harddisk 1 -> [ST] CL1-A Ser =8100012385000123 LDEV = 200 [HITACHI ] [DF600F-
CM ]
Harddisk 2 -> [ST] CL1-A Ser =8100012385000123 LDEV =
Harddisk 3 -> [ST] CL1-A Ser =8100012385000123 LDEV =
Harddisk 4 -> [ST] CL1-A Ser =8100012385000123 LDEV =
Harddisk 5 -> [ST] CL1-A Ser =8100012385000123 LDEV =
Harddisk 6 -> [ST] CL1-A Ser =8100012385000123 LDEV =
Harddisk 7 -> [ST] CL1-A Ser =8100012385000123 LDEV =
C:\HORCM\etc>

Setting the environment variable

C:\HORCM\etc>set HORCMINST=0
C:\HORCM\etc>set HORCC_MRCF=1
C-8
Hitachi AMS 2000 Family Copy-on-Write SnapShot User Guide
9. Enter the following example lines in the command prompt to
verify the connection between CCI and the array:
•
HORC = SMPL HOMRCF[MU#0 = SMPL MU#1 = NONE MU#2 = NONE]
RAID6RAID5[Group 2- 0] SSID = 0x0000
HORC = SMPL HOMRCF[MU#0 = SMPL MU#1 = NONE MU#2 = NONE]
RAID6RAID5[Group 3- 0] SSID = 0x0000
HORC = SMPL HOMRCF[MU#0 = NONE MU#1 = SMPL MU#2 = NONE]
RAID6RAID5[Group 2- 1] SSID = 0x0000
HORC = SMPL HOMRCF[MU#0 = NONE MU#1 = SMPL MU#2 = NONE]
RAID6RAID5[Group 4- 0] SSID = 0x0000
HORC = SMPL HOMRCF[MU#0 = NONE MU#1 = NONE MU#2 = SMPL]
RAID6RAID5[Group 2- 2] SSID = 0x0000
HORC = SMPL HOMRCF[MU#0 = NONE MU#1 = NONE MU#2 = SMPL]
RAID6RAID5[Group 5- 0] SSID = 0x0000
For more information on the configuration definition file, refer to the
Hitachi Adaptable Modular Storage Command Control Interface (CCI)
User's Guide.
To perform ShadowImage operations, you must set the environment
variable. The following describes an example in which two instances
are configured within the same host.
1. Set the environment variable for each instance. Enter the
following from the command prompt:
•
2. To enable SnapShot, the environment variable must be set as
follows:
•
Operations using CCI
2 [HITACHI ] [DF600F ]
3 [HITACHI ] [DF600F ]
2 [HITACHI ] [DF600F ]
4 [HITACHI ] [DF600F ]
2 [HITACHI ] [DF600F ]
5 [HITACHI ] [DF600F ]