Hitachi AMS2100 User Manual page 102

•
•
•
4-6
Hitachi AMS 2000 Family Copy-on-Write SnapShot User Guide
instruction has not been issued or has been completed (no RAID
group in the Power Saving Status of Normal(Command
Monitoring) exists) before restarting the array.
•
To install the operated option, restart the array. The feature will close
upon restarting the array. The array cannot access the host until the
reboot is completed and the system restarts. Make sure that the host
has stopped accessing data before beginning the restart process.
After unlocking the operated option, even when the array does not
reboot, the status of the option displays as enabled, however,
SnapShot cannot be operated until the array reboots. Restart usually
takes 6 to 25 minutes.
It may take time for the array to respond, depending upon the
condition of the array. If it does not respond after 25 minutes or more,
check the condition of the array.
•
8. A message appears stating that the restart is successful. Click
Close.
Installation of SnapShot is now complete.
Installing and enabling SnapShot