Hitachi AMS2100 User Manual page 108

4-12
Hitachi AMS 2000 Family Copy-on-Write SnapShot User Guide
9. Check the check box of SNAPSHOT, and click Reconfigure
Memory.
10.A message appears, click Confirm.
•
11.A message appears, click Close.
The Licenses list appears.
12.Enabling or disabling of SnapShot is now complete.
To enable or disable SnapShot with rebooting
(For instructions using CLI, see
page B-7.)
1. In the Navigator 2 GUI, select the array where you want to enable
SnapShot, and click Show & Configure Array.
2. In the tree view, click Settings, then click Licenses.
3. Select SNAPSHOT in the Licenses list, then click Change
Status.
The Change License screen appears.
•
4. To enable, check the Enable: Yes box.
To disable, clear the Enable: Yes box.
5. Click OK.
•
•
6. A message appears confirming that this optional feature is set.
Click Reboot Array.
Installing and enabling SnapShot
Enabling or disabling SnapShot on