Samson AURO5 Owner's Manual page 15

You can mount the Auro 3, Auro 5, and You can mount the Auro 3, Auro 5, and
Auro 6 speakers on a standard micro- Auro 6 speakers on a standard micro-
phone stand with 5/8-inch thread. In
figure 3 you can see the installation for figure 3 you can see the installation for
an Auro series speaker mounted on a an Auro series speaker mounted on a
mic stand in the horizontal position.
Follow the steps below to mount your
speaker. speaker.
• Remove the ABS plastic insert on the • Remove the ABS plastic insert on the
top and bottom of the Auro speaker.
• Screw the metal mounting bracket • Screw the metal mounting bracket
on to a microphone stand with a
standard 5/8-inch thread by turning
the bracket clockwise. (If you have
a European stand with a 3/8-inch
thread, you can get an optional 3/8
to 5/8-inch adapter from your local
audio dealer.)
• Slide the Auro speaker into the • Slide the Auro speaker into the
metal bracket keeping the ends of
the bracket inside the top and bot-
tom bracket channels.
• Insert the thumbscrews through • Insert the thumbscrews through
the mounting bracket and into the
threaded inserts, then tighten the thumbscrew, but not all the way.
Important Note: Important Note: Be careful to insert the thumbscrews straight and not to cross-
thread the thumb screws. thread the thumb screws.
• Position the Auro to the desired angle, and then, fully tighten the thumb- • Position the Auro to the desired angle, and then, fully tighten the thumb-
screw.
Auro Installation
11
Figure 3