International Datacasting STAR Generation 2 User Manual page 8

INDICATIONS
LOCK
WARNING
ALARM
AUDIO 1
AUDIO 2
REMOTE
AUDIO 3 /OPTION 1
AUDIO 4 /OPTION 2
RECORD
3. Connect the STAR to a DHCP IP network. If a DHCP network is not available you can use the LCD to
configure a static IP address (Control>MGMT> IP Static Address). The STAR default is 192.168.0.1. Then
connect the STAR with a switch or computer; and set your computer IP address in the same range.
4. Connect a personal computer to the receiver, open a web browser and connect to the receiver by typing the
IP address of the receiver in your browsers address bar.
5. Login with: Username: admin. Password: 12345. You can change the login username and password
with the web GUI in the "CONTROL>MGMT>IP" menu under "Web".
Your STAR receiver is now ready for use.
Note: On subsequent startup of the STAR receiver a comprehensive check of the SD card structure and content
takes place. This can delay the appearance of Trigger information on the Utility Trigger page by up to 20
seconds.
S T A R
COLOR
NONE
YELLOW
RED
NONE
NONE
NONE
NONE NONE
NONE NONE
NONE
G e n 2 R e c e i v e r
INDICATIONS
LOCK
WARNING
ALARM
AUDIO 1
AUDIO 2
REMOTE
AUDIO 3 /OPTION 1
AUDIO 4 /OPTION 2
RECORD
U s e r ' s G u i d e
COLOR
RED
RED
RED
RED
RED
NONE
RED NONE
RED NONE
NONE
Page 8 of 47