Decoder Backup Channel X - International Datacasting STAR Generation 2 User Manual

OPTIONAL (not shown):
LIMITER ENABLED: ON/OFF.
LIMITER LEVEL: -50 to 0 dBFS, in steps of 1 dB.
LIMITER RECOVERY: 20 (Fast) to 100 (Slow) Milliseconds recovery time.

Decoder Backup Channel x

The backup for each audio channel can be enabled/disabled and the order of choice for the backup
source can be defined. Additionally each backup source can be viewed and or configured. As delivered
there are no audio backup files on the SD card. Multiple audio files (.mp2 or .mp3) can be stored in the
SD card root directory, but only one can be identified as the default file for each decoder. If the Service
Operator has delivered a backup playlist this will be played instead of the default file (If enabled). Consult
Service Operator for full details.
PRIORITY: Select the order of the available backup sources.
BACKUP PLAYLIST: Select the audio file from the SD card to be played as backup for this Decoder.
Note: If a Backup Playlist is available from the Head end it will be played instead. If the Backup
Playlist has any missing content, that content will be skipped over and the playlist will continue to
play (loop playback). If there is no Backup Playlist the receiver will go to the next priority Backup.
IP STREAM: Choose the SOURCE of the Backup audio from: INTERNET SERVICE; RTP/IP AUDIO or
MPEG TS OVER IP. Once selected the required SOURCE calls up the appropriate set of parameters to
specify the addressing.
Note: In INTERNET SERVICE source, Port Mapping uses the Service ID+10,000 as the port
number (User equipment configuration is required). User Defined allows the user to specify the
port number.
Note: In MPEG TS over IP, Auto in PID Mode uses as backup any PID in the IP-IN transport
stream that matches the current program. Manual allows the user to specify the PID played.
S T A R G e n 2 R e c e i v e r U s e r ' s G u i d e
Page 14 of 47