Dvb-Ts - International Datacasting STAR Generation 2 User Manual

S T A R G e n 2 R e c e i v e r U s e r ' s G u i d e
INPUT STREAM IP Address/UDP Port: This is the IP Address/Port number on which the MPEG2 TSoverIP
stream is received.

DVB-TS

INPUT: Decoder input can be selected between SAT-IN (L-band tuner), IP-IN (TSoIP) or ASI-IN (As Factory
installed option only). .
PID LIST: This allows you to enter and enable the Network Time Protocol (NTP) PID, the Network Control
Channel (NCC) PID, the Electronic Channel Guide (ECG) PID and the FlexKey (ECM) PID if the option is
installed. MPE PIDs that are required to decode IP Audio services are automatically loaded to each decoder's
PID list and are not shown here.
DVB-TS FLEXKEY: (Optional) This setting is needed to identify the IP address and port number which contains
the ECM messages sent by Flexkey Encryptor. Requires ECM PID.
Page 12 of 47