Basic Operation - Xyron XM1200 User Manual

A S S E M B L Y I N S T R U C T I O N S
Remove the Xyron System and Document Feed Tray from the packaging. The
system is shipped with a sample supply cartridge already installed. Install the
feed tray by inserting it horizontally into the cartridge opening by the grooves
in hte left and right dispenser side plates as shown. When correctly installed,
the tray will rest horizontally.
Document
Feed Tray
Assmebly
Step 1:
Insert and align document on feed tray.
Extend the document completely into
the cartridge opening. Align to the left
for letter size documents, to the right
for A3/A4 documents.
Step 2:
Gently guide the document forward
while turning the handle clockwise.
Step 3:
Trim to desired length using the cut
blade at the roller exit. Apply pressure
down on the orange blade holder and
slide to the right or left.
How to remove document from adhesive
• Remove the protective clear mask layer
and discard.
• Always remove the liner from the media
as shown.
B A S I C O P E R A T I O N
Cartridge
Upper and
lower grooves
in dispenser
side plate