Related Manuals for Xyron 4400
Summary of Contents for Xyron 4400
- Page 1 For more information see the users manual, or visit xyronpro.com, select "support", then selct 4400 from the drop down menu.
- Page 2 Remove media supporter before loading laminate rolls.
- Page 3 Match bottom and top roll with the yellow and green dots on machine. On each one of the ends it will tell you top roll or bottom roll.
- Page 4 Take the ends of the top roll, supply role weave it under the Teflon bar, Teflon pull the sheet toward you, bars grabbing all the way on each end. Make sure you pull out rollers enough so it hangs just underlay below the bottom roller.
- Page 5 Take the ends of the bottom supply roll weave it under the Teflon role bar pull the sheet toward you, grabbing all the way on each underlay end. This time, pull out film enough to stick firmly to the material from the top bar rollers...
- Page 6 Using the foot pedal (direction, FORWARD; feed' FOOT; speed control, 3) start feeding it through so you can see about 3” coming out between rubber rollers in the back.
- Page 7 To remove the wrinkles from the material, press the foot pedal and use the load load plate plate, or a scrap piece of cardboard and feed it through the machine until the wrinkles disappear. load plate...
- Page 8 Replace the media support tray and you are now ready to begin use of the XYRON 4400. For more information see the users manual, or visit xyronpro.com, select "support", then selct 4400 from the drop down menu.