Advertisement
Quick Links
Adhesive Application and Laminating System
U
S
Adhesive Application &
Laminating System
The Xyron
2500 is an economical and easy to use document finishing system.
™
This versatile and non-electric system has been designed to laminate or apply
mounting adhesive to a variety of media. The same system is capable of laminating,
selectively applying adhesive or laminating and applying adhesive at the same time.
With the Xyron 2500, documents are easily laminated or can be transformed into
signs, stickers or labels instantly. The machine and supplies are compatible with all
types of computer-printed media including laser, inkjet, color and thermal in a wide
range of material sizes and thickness.
Supply rolls for 2500
AT400-300
AT402-300
AT406-170
DL403-300
SL403-300
LAT405-300
LAT406-300
LAT409-170
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500
Please follow the attached directions carefully.
1-800-793-3523
E
R
'
Adhesive Application – High Tack
Adhesive Application – Low Tack
Adhesive Application – Repositionable
Two-Sided Lamination
One-Sided Lamination
Combination Lamination/Adhesive Application - High Tack
Combination Lamination/Adhesive Application - Low Tack
Combination Lamination/Adhesive Application - Repositionable
2500
S
G
U
I
D
E
Advertisement
Related Manuals for Xyron 2500
Summary of Contents for Xyron 2500
- Page 1 The same system is capable of laminating, selectively applying adhesive or laminating and applying adhesive at the same time. With the Xyron 2500, documents are easily laminated or can be transformed into signs, stickers or labels instantly. The machine and supplies are compatible with all types of computer-printed media including laser, inkjet, color and thermal in a wide range of material sizes and thickness.
-
Page 2: Crank Handle
Understanding the Xyron 2500’s Adhesive/Laminating System Parts and Functions Upper Idle Bar Top Cover Removes to Lower Idle Bar install/remove supplies Paddle Used to lock document in place Feed Tray Used to guide and align documents into the machine Crank Handle... - Page 3 The Xyron 2500 comes with an instructional video. In addition to explaining how to load supply rolls, the video also includes tips on how to use the machine. Xyron recommends watching this video before attempting to load and use the 2500.
- Page 4 Step 3: Step 4: Step 5: • • • On the bottom Make certain the Rotate the handle to supply roll, grasp lower film is tight. pull the supplies the laminated starter If necessary, rotate through the machine. section by the leading the supply roll in the •...
- Page 5 How to apply Front & Back Lamination or Front-Side Lamination/Back-Side Permanent Adhesive Transfer Step 1: Step 2: • • Pull back on the paddle so that it is in Push forward on the paddle to lock the the “up” position. document in place.
-
Page 6: Replacement Cartridges
How to apply Back-Side Permanent Adhesive Transfer • Steps 1, 2 and 3... same as above. • • Remove the protective clear mask Remove the document from the white layer and discard. release liner when you’re ready to mount it. •... - Page 7 Turn the handle 1/2 turn maximum Remove the supply rolls from the in the direction of the arrows. This machine. Xyron recommends that step will cause the uncut film at the supplies are stored laying flat in edges to break, creating a laminated...
- Page 8 For applications where the appearance of your laminated document is critical, it is highly recommended that the Xyron 2500 be used and stored in a clean, dust-free environment. Airborne dust particles and lint will tend to adhere to the bare adhesive inside the supply roll.
-
Page 9: Troubleshooting
Blade has accumulated Clean adhesive buildup cut well. adhesive buildup or from blade using isopropyl is dull. alcohol or Xyron Adhesive Cleaner #990. Replace blade if necessary. Thin and/or wide Paddle not operated Ensure paddle is pushed documents tend to wrinkle... -
Page 10: Technical Specifications
Xyron, Inc. warrants that the Xyron 2500 is free from defects in material and workmanship for a period of one (1) year from the date of purchase. Xyron, Inc. will repair or replace a defective product or part without charge provided it is returned to the address below, freight prepaid with proof of purchase.