Xyron PRO 2500 User Manual
  1. Manuals
  2. Brands
  3. Xyron Manuals
  4. Laminator
  5. PRO 2500
  6. User manual

Xyron PRO 2500 User Manual

Adhesive application and laminating system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
U S E R ' S
G U I D E
Adhesive Application &
Laminating System
The XM2500 is an economical and easy to use document finishing system. This
versatile and non-electric system has been designed to laminate or apply mounting
adhesive to a variety of media. The same system is capable of laminating, selectively
applying adhesive or laminating and applying adhesive at the same time. With the
XM2500, documents are easily laminated or can be transformed into signs, stickers
or labels instantly. The machine and supplies are compatible with all types of
computer-printed media including laser, inkjet, color and thermal in a wide range of
material sizes and thickness.

Advertisement

Table of Contents
loading

Related Manuals for Xyron PRO 2500

Summary of Contents for Xyron PRO 2500

  • Page 1 U S E R ’ S G U I D E Adhesive Application & Laminating System The XM2500 is an economical and easy to use document finishing system. This versatile and non-electric system has been designed to laminate or apply mounting adhesive to a variety of media.

  • Page 2: Features And Functions

    F E A T U R E S & F U N C T I O N S Input Side Upper Idler Bar Top Cover Remove to Lower Idler Bar install/remove supplies Paddle Used to lock document in place Feed Tray Used to guide and align documents into the machine...
  • Page 3 A S S E M B L Y I N S T R U C T I O N S Remove the XM2500, crank handle assembly and hex wrench from the packaging. 1. Place the Crank Handle assembly onto the D-shaped roller shaft with the set screw facing upward.
  • Page 4 Step 3: Step 4: Step 5: • On the bottom supply • Make certain the lower • Rotate the handle to pull roll, grasp the laminated film is tight. If necessary, the supplies through the starter section by the rotate the supply roll machine.

  • Page 5: Basic Operation

    B A S I C O P E R A T I O N Step 1: Step 2: • Pull back on the paddle so that it is • Push forward on the paddle to lock in the “up” position. the document in place.
  • Page 6 S U P P L Y R O L L R E M O V A L Step 1: Step 2: • Remove the top cover by lifting • Make a small hole with a knife about upward. one inch (2.54cm) from the left edge of the film.
  • Page 7 A V A I L A B L E S U P P L Y R O L L Product Supply Description Permanent High-Tack Adhesive: Extremely aggressive adhesive instantly creates a permanent bond on most surfaces. Sets instantly and will not peel. Acid-Free. Permanent Standard Adhesive: Moderately aggressive adhesive creates a permanent bond on most surfaces.

  • Page 8: Product Specifications

    M A I N T E N A N C E , S A F E G U A R D S & T I P S When properly used, the XM2500 is relatively maintenance-free. Listed below are safeguards and tips that will produce better results. Importance of a clean document: For best results when laminating, it is highly recommended that the document be cleaned with a soft, lint-free cloth immediately prior to lamination.

  • Page 9: Troubleshooting

    T R O U B L E S H O O T I N G Symptom Cause Solution Long documents Feed Tray not installed Verify tray is completely installed (such as banners) correctly or supply roll not such that it is approximately level are not aligned seated at base of groove and square.

  • Page 10: Warranty Information

    Xyron, Inc. warrants that the XM2500 is free from defects in material and workmanship for a period of one (1) year from the date of purchase. Xyron, Inc. will repair or replace a defective product or part without charge, with proof of purchase. If the product is damaged by neglect or misuse, the warranty is null and void.

Table of Contents