Gardenline GEHM28 User Manual page 24

GB IRE
Maintenance
Replace the blades
Always unplug the hover mower before removing or refitting
the blades.Only use the original supplied free blades for
replacement.
1. Turn the hover mower over so you can see the blade holder.
The blades have a keyhole shaped slot (Fig 11). To remove a
blade push it towards the larger end of the blade upwards.
You will have to push the blade quite hard before it moves.
2. Before fitting a new blade, clean the blade holder pegs. To fit
a new blade, place the larger end of the keyhole slot over the
blade holder peg and then pull the blade outwards until the
peg is fitted into the smaller end of the keyhole slot. You will
have to pull the blade quite hard before it moves.
3. Ensure the blades are secure before using the hover mower.
Power cord
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
AFTER SALES SUPPORT
+44 (0)1904 727501
GB
+353 (0)1 902 2605
IRE
1000W Hover Mower
www.coreservice.co.uk
24