3.3 Testing and Installing the Device
After the "sensor adding" process has been completed, to make sure the connection of the device is working,
take your device to the room you want to use it in. Test the device by pressing the tamper switch for 5
seconds and then release it. If you get a notification that says your device has been tampered with, it's within
range.
Now you can mount the device with the included double-sided tapes.
To ensure proper contact, the distance between the sensor and magnet should be within 1/4 inch.
Please ensure the tops of the two pieces line up and be mounted in a vertical/upright position.
The recommended mounting height is 6.6 ft (2M).
Don't let the device face a window or sunlight.
Don't let the device face a source of heat. For example: a heater.
Wi-Fi 3-IN-1 Trio Sensor User Manual
V1 2018