Chapter 3. Device Setup; Power On The Device; Adding The Device To The System - HOME8 WTS3100 User Manual

Chapter 3. Device Setup

3.1 Power On the Device

Pull and remove the black plastic strip in the back of the device to initiate battery contact. The LED will flash
red for a second.

3.2 Adding the Device to the System

Before you begin using the device, it will need to be added to the system first. To activate the device,
complete the following steps.
Note: Make sure the Security Shuttle/Hub is powered on and connected to your router.
1. Tap the menu icon to show the sidebar menu.
Wi-Fi 3-IN-1 Trio Sensor User Manual
V1 2018