Chapter 4. Starting to Use the Device
At this stage, your sensor is now ready for use.
4.1 Edit Sensor
Go to "Device management", and select the sensor you
want to edit.
1.
Rename Sensor
Tap "Display Name" to rename the sensor.
2.
Remove Sensor
To remove the sensor from the current Security
Shuttle, tap "Remove Sensor".
3.
Last Updated Log
Check the communication history between Security
Shuttle and Sensor.
4.
Wi-Fi Signal strength
See the signal strength of wireless communication
between Security Shuttle and Sensor.
4.2 Contact, Motion and Temperature Setting
Go to the "Energy" tile to set up the device.
Temperature Setting
The number shown is the current ambient temperature. The number will update while there is a change in
temperature. You can move the temperature bar freely to set the Below/Above threshold of when to send
the notification alert.
Wi-Fi 3-IN-1 Trio Sensor User Manual
V1 2018
1
2
4
3