Table of Contents
Advertisement
Help with the appliance
en
Home Connect is not working.
Humidity in the room is increas-
ing.
Unusual noises when drying.
The appliance feels cold
despite drying.
Drying programme is stopped.
Residual water in the conden-
sation container despite the
appliance being connected to
the drain hose*.
* Depending on how the appliance is equipped or the available accessory
--------
If you cannot rectify the fault yourself by turning the appliance off and then on
Note:
again, please contact our after-sales service.~ Page 72
68
You can find solutions to problems with Home Connect at
■
www.home-connect.com.
The availability of the Home Connect functionality depends on the
■
availability of the Home Connect Services (e.g. provision of the app)
in your country. Home Connect Services are not available in every
country – for further information please check: www.home-con-
nect.com.
Make sure the room is sufficiently ventilated.
When drying is in progress, the pump and compressor generate noise
when operating normally. This does not indicate that the appliance is
malfunctioning.
Not a fault. The appliance can dry effectively at low temperatures using a
heat pump.
If the drying programme is stopped due to a power failure, restart the
programme or remove the laundry and spread it out.
If the optional drain hose is installed, residual water remains in the con-
densation container due to the appliance's self-cleaning function.
Advertisement
Table of Contents
