Appliance Settings; Childproof Lock; Tones; Other Appliance Settings - Siemens WT7XH940GB Installation And Operating Instructions Manual

Appliance settings

en
2
Appliance settings
Y ou can activate/deactivate the
A p p l i a n c e s e t t i n g s
following appliance settings directly or
change further appliance settings
under à .
Switch on the appliance.
1.
Press c or press and hold c and
2.
swipe upwards.
A menu is displayed.

Childproof lock

You can activate or deactivate the
appliance's childproof lock. You can
activate the childproof lock to prevent
the control panel from accidentally
being operated.
Activate the appliance setting as
follows:
Press w .
The childproof lock is activated.
Notes
You can activate the childproof lock
■
at any time after you switch on the
appliance.
The childproof lock also remains
■
activated when the appliance is in
standby mode. In order to be able to
operate the control panel after the
appliance is switched on, you must
deactivate the childproof lock.
38
Deactivate the appliance setting as
follows:
Press anywhere on the display.
1.
A message appears in the display.
Press and hold Deactivate child
2.
lock for three seconds.
The childproof lock is deactivated.

Tones

You can activate or deactivate the
appliance's signal tones. If you
deactivate the signal tones, operate the
appliance without operating and
information signals.
Activate/deactivate the appliance
setting as follows:
Press C /D.
The signal tones are activated/
deactivated.

Other appliance settings

You can activate/deactivate or adjust
further appliance settings under à .
Press à .
1.
Swipe until the require setting
2.
appears.